Turbo oil inlet line

Reply Subscribe

Thread Tools

Search this Thread

11-19-2002 | 09:18 PM

jspecracer7

Thread Starter

Senior Member

Joined: May 2002

Posts: 4,928

From: Okinawa, Japan

Got my 62-1 on last sunday and have had lots of oil seeping out of the Center Cartridge. I was told by Igy that it's because the hole in the restrictor plate for the oil inlet is too big.

My question is....

WHAT SIZE HOLE SHOULD I BE DRILLING THEN?

11-19-2002 | 11:35 PM

1Revvin7

Senior Member

Joined: Oct 2001

Posts: 10,906

From: Peoria, AZ

as long as we are on this topic, i want to make my own oil return line instead of the stock on with alll those vac lines on it, what size should it be?

11-19-2002 | 11:37 PM

Felix Wankel

Senior Member

Joined: Nov 2001

Posts: 664

Quote:

Originally Posted by 1Revvin7' date='Nov 19 2002, 10:35 PM

as long as we are on this topic, i want to make my own oil return line instead of the stock on with alll those vac lines on it, what size should it be?

Technically thats the supply line.

I'm poor, so I just cut the vacuum line off mine at the spot welds or whatever they are.

11-20-2002 | 10:40 PM

1Revvin7

Senior Member

Joined: Oct 2001

Posts: 10,906

From: Peoria, AZ

ok so on the feed line what size should i use? and just stick a 90degree an fitting in there, but what about the other end? I know u guys aren't using the stock stuff...