1989 Mazda Rx-7 Tii For Sale
#1
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 811
From: One hour north of chicago (Mundelein to be exact)
For Sale:
Clean 1989 Mazda RX-7 Turbo II – Red w/ black interior
$6,000
Mundelein, IL, north of Chicago
These last few months away at school (Iowa) have made me reconsider keeping this car. I had plans to modify it some more over the summer but since I am away at school I don’t think it is worth it to do all this work to the car over the summer and then not be able to drive it. I can’t afford to bring this car to school with me so it just sits in the garage. I’ve decided to purchase a cheaper car that simply provides transportation that I can actually bring to school. The car is in good condition. Sorry there is soo much to read but I would like to give an accurate description of the car.
The facts:
ENGINE:
Fairly recent rebuild
-Was done last summer, about 5000 miles have been put on it since then.
-All new seals were used and new rotor housing.
-The rotors have been replaced with series 4 rotors.
-water pump was replaced at this time
TB modification was performed
New ACT clutch and EXEDY 12 lbs flywheel will be going in
-purchased these parts thinking I would keep the car.
Cone filter intake
Custom FMIC
-core measures approx. 28” x 6” x 3”
RB full turbo back exhaust
HKS turbo timer
APEX’i S-AFC
FCD (currently not installed)
A/C & Power Steering were removed (for FMIC fitment)
Koyo Radiator (just installed)
SS oil cooler lines (just installed)
ACCELL spark plug wires?
-not 100% on the brand
GFB BOV
All emissions removed
INTERIOR:
Black cloth interior
MOMO steering wheel
Short Shifter
Gauges can be included for a small additional cost and must be installed
-boost, water temp, A/F ratio, and oil pressure maybe?
-autometer $15 each gauge
-dual gauge pod already installed on the pillar
No CD player will be installed
-I have a Blaupunkt CD player I can include but must be installed
Driver’s seat has a little rip but I patched up
Missing driver’s side air vent by mirror
Other than the two previous problems, the interior is tip top
EXTERIOR:
Factory Blaze Red
NO RUST
Tachometer reads 83k or 63k miles
-It’s been a while since I’ve seen my car (in garage back home)
-cable has been broken for about 6k miles so it’s around
-I have cable to replace this and I’m willing to install
White milano 5-spoke wheels
-16” x 8”
-BF Goodrich All-seasons with a decent amount of tread left
Has a few small dings (common of a car this age)
White sticker under both rearview mirrors of a rotor (can be removed if requested)
SIDE NOTES:
I will get detailed pictures and a video in May. This is mainly to get the word out that I’m selling my car. If you have any questions or comments at all please feel free to PM, email, or call me at the information below. I also have other parts for sale such as RB anti-roll bars, Toe eliminator bushings, SS brake & clutch lines, and some other parts, all new. I will set a link to the actual page for those later when I get the pictures of them.
PICTURES:
Some pictures can be found here
http://www.imagestation.com/album/?id=4287675149
-the pictured housings were not the ones used in the rebuild
Several more to come, however.
CONTACT:
(847) 452-4402 (available 24/7)
robert-maier@uiowa.edu
Mundelein, IL
19678 Trinity Drive
If I don't get any bites by the end of May She's going on ebay.
Clean 1989 Mazda RX-7 Turbo II – Red w/ black interior
$6,000
Mundelein, IL, north of Chicago
These last few months away at school (Iowa) have made me reconsider keeping this car. I had plans to modify it some more over the summer but since I am away at school I don’t think it is worth it to do all this work to the car over the summer and then not be able to drive it. I can’t afford to bring this car to school with me so it just sits in the garage. I’ve decided to purchase a cheaper car that simply provides transportation that I can actually bring to school. The car is in good condition. Sorry there is soo much to read but I would like to give an accurate description of the car.
The facts:
ENGINE:
Fairly recent rebuild
-Was done last summer, about 5000 miles have been put on it since then.
-All new seals were used and new rotor housing.
-The rotors have been replaced with series 4 rotors.
-water pump was replaced at this time
TB modification was performed
New ACT clutch and EXEDY 12 lbs flywheel will be going in
-purchased these parts thinking I would keep the car.
Cone filter intake
Custom FMIC
-core measures approx. 28” x 6” x 3”
RB full turbo back exhaust
HKS turbo timer
APEX’i S-AFC
FCD (currently not installed)
A/C & Power Steering were removed (for FMIC fitment)
Koyo Radiator (just installed)
SS oil cooler lines (just installed)
ACCELL spark plug wires?
-not 100% on the brand
GFB BOV
All emissions removed
INTERIOR:
Black cloth interior
MOMO steering wheel
Short Shifter
Gauges can be included for a small additional cost and must be installed
-boost, water temp, A/F ratio, and oil pressure maybe?
-autometer $15 each gauge
-dual gauge pod already installed on the pillar
No CD player will be installed
-I have a Blaupunkt CD player I can include but must be installed
Driver’s seat has a little rip but I patched up
Missing driver’s side air vent by mirror
Other than the two previous problems, the interior is tip top
EXTERIOR:
Factory Blaze Red
NO RUST
Tachometer reads 83k or 63k miles
-It’s been a while since I’ve seen my car (in garage back home)
-cable has been broken for about 6k miles so it’s around
-I have cable to replace this and I’m willing to install
White milano 5-spoke wheels
-16” x 8”
-BF Goodrich All-seasons with a decent amount of tread left
Has a few small dings (common of a car this age)
White sticker under both rearview mirrors of a rotor (can be removed if requested)
SIDE NOTES:
I will get detailed pictures and a video in May. This is mainly to get the word out that I’m selling my car. If you have any questions or comments at all please feel free to PM, email, or call me at the information below. I also have other parts for sale such as RB anti-roll bars, Toe eliminator bushings, SS brake & clutch lines, and some other parts, all new. I will set a link to the actual page for those later when I get the pictures of them.
PICTURES:
Some pictures can be found here
http://www.imagestation.com/album/?id=4287675149
-the pictured housings were not the ones used in the rebuild
Several more to come, however.
CONTACT:
(847) 452-4402 (available 24/7)
robert-maier@uiowa.edu
Mundelein, IL
19678 Trinity Drive
If I don't get any bites by the end of May She's going on ebay.
#3
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 811
From: One hour north of chicago (Mundelein to be exact)
I got some more pictures of the car put on the car domain site. Please take a look and keep in mind that I will be getting plenty more when I come home from school the 15th.
1989 Mazda RX-7 for sale
1989 Mazda RX-7 for sale
#5
hello, i am new to NP, and i am looking for an 89-91 RX7 tii. i am very interested in your car and i am currently selling my integra GSR for an rx7. i was just wondering how long you might be willing to hold your car so i can get some cash?
#8
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 811
From: One hour north of chicago (Mundelein to be exact)
Sorry to take so long to get back to this thread. No, I will not trade for an N/A. Ryziez, I sent you a PM but I'm selling my car on a first come first served basis. I just need to get back from school. I'll be home this weekend, though.
Thread
Thread Starter
Forum
Replies
Last Post
walken
RX-7 & RX-8 For Sale
1
04-02-2007 04:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)