Rotary Engine Building, Porting & Swaps All you could ever want to know about rebuilding and porting your rotary engine! Discussions also on Water, Alcohol, Etc. Injection

Hp Gains With Street Port

Thread Tools
 
Search this Thread
 
Old 11-30-2003 | 06:54 AM
  #1  
eddierotary's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 135
From: Evans Mills NY
Default

what are the HP gains on a street port? i never had a street port engine before and i would like to know how much it will be, the engine is a rebuild 87 turbo II with street port and hurleys apex seals, ill going be running a jaytech intake and a holley 650 and a heavily ported S4 turbo, NPR intercooler, 2 1/2 inch exhaust with dinomax muffler as a presilencer and a apex stile N1 muffler , i just wanna know like how much i would expect of it. before i had a stock port 13b gslse engine with the same as above, ex the carb that it was a 45dcoe weber and i was making 203 hp at the wheel. does is going do the same or more? thanks



eddierotary
Old 11-30-2003 | 08:03 AM
  #2  
Judge Ito's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 1,915
From: NJ USA
Default

On a good street port expect a 15% increase in horsepower over the stock hp numbers. 15% being the lowest gains. Some ports have landed a higher percentage in hp gains vs a stock port.
Old 11-30-2003 | 12:56 PM
  #3  
Cheers!'s Avatar
Senior Member
 
Joined: Nov 2002
Posts: 3,108
Default

Judge ito,



would streetporting a car that will be using a stock turbo be benificial? or is the stock turbo just going to choke off your hard efforts of a street port?



-Jason
Old 12-01-2003 | 12:47 PM
  #4  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

i think the stock turbo is too small for the stock ports, porting would olny make it worse



mike
Old 12-07-2003 | 12:20 AM
  #5  
eddierotary's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 135
From: Evans Mills NY
Default

i know but is the only turbo i have now, plus the exhaust housing is ported real big and the wastegate too. im planning to get a hks TO4E turbo kit later on. it just i dont have the money right now to buy it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drewrey2004
Rotary Engine Building, Porting & Swaps
19
01-09-2007 07:26 PM
13bdatsun510
Rotary Engine Building, Porting & Swaps
0
10-12-2006 12:34 AM
rx7ahh
Rotary Engine Building, Porting & Swaps
2
02-12-2005 03:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:25 AM.