Fd Ba 6.5 Pros Fit With Based Model Door Mounts
#1
After using hacked Bose door mounts with the BA 6.5 Pros for 2 years I switched to a set of base model speaker mounts and sealed up the open area that allows access to the window tracks with a big sheet of dynamat.
The Bose mounts did not seal the speakers front to back because of the irregular shape of enclosure. By contrast I was able to install the BA 6.5s in the base mounts without any significant modification. I was expecting the bass and mid range to improve with the new setup considering how **** poor the previous setup was. However, I was still surprised at how much better the new setup sounds.
The Bose mounts did not seal the speakers front to back because of the irregular shape of enclosure. By contrast I was able to install the BA 6.5s in the base mounts without any significant modification. I was expecting the bass and mid range to improve with the new setup considering how **** poor the previous setup was. However, I was still surprised at how much better the new setup sounds.
#3
I just replaced my door speakers which were blown for 2 years - which are my only speakers besides a sub
if I didnt put a new headunit in last year because the old one wouldnt put out any sound I would remove the stereo altogether
if I didnt put a new headunit in last year because the old one wouldnt put out any sound I would remove the stereo altogether
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)