Wrecked car
#5
I tried changing lanes but was a bit late, at least I didnt hit him head on. The car drove away amazingly. I was going to pick a race on the way home but the car looked like ******* junk at that point. That was back in 1989 mind you.
#8
Originally Posted by j9fd3s' date='Nov 12 2002, 06:48 PM
did they fix it? it doesnt look too bad
mike
mike
I ended up taking the drivetrain out and putting it in a Cutlass that my friend was going to junk becuase he had blown the 6cyl engine in it.
I drove the Cutlass for year or so with that engine, then I took it out, rebuilt it and put it in a 1980 Z-28 that I bought with no engine in it, and a new 454 went in the Cutlass.
#9
Hers the specs on Robs car after the wreck...
: Technical information about KITT
---------------------------------------
I received the following specs sheet from Amy Martin, David Hasselhoff's niece, via e-mail a few years ago. She copied it from a brochure which she had. This is Amy's copy exactly as I had received it:
KNIGHT INDUSTRIES TWO THOUSAND
------------------------------
VEHICLE TYPE: Front engine, rear wheel drive, two
passenger, two door coupe
DIMENSIONS: Wheel base(101 in.) Length(189.8 in.)
Width(72 in.) Height(37.2 in.)
ENGINE TYPE: Knight Industries turbojet with modified
afterburners
TRANSMISSION: 8 speed microprocessor turbodrive with auto
pilot(needs no driver)
STEERING: TYPE> Modified rack-and-pinion
TURN-CIRCLE> 2ft. with rocket assist
BRAKES: Type- Electromagnetic hyper-vacuum disc
CHASSIS/BODY-- TYPE>Unit construction
BODY MATERIAL>Classified(compound is
virtually indestructible)
PRICE NEW: $11,400,000 est.
ACCELERATION: 0-60mph>.2 seconds with power boosters
Standing 1/4 mile>4.286sec.@300mph
BRAKING: 14ft.(70-0 mph)
FUEL ECONOMY: Classified(to avoid heart attacks in Detroit)
ACCESSORY FEATURES: Operationally controlled by the Knight
Industries 2000 microprocessor. Features include: Auto
Cruise, Auto Pursuit, Auto Collision Avoidance(with
over-ride option), and Emergency Eject. Knight 2000
microprocessor is equipped with a computer "voice," known as
"KITT." Complete audio/video in-dash entertainment/
surveillance capabilities,including radar,sonar,and x-ray.
: Technical information about KITT
---------------------------------------
I received the following specs sheet from Amy Martin, David Hasselhoff's niece, via e-mail a few years ago. She copied it from a brochure which she had. This is Amy's copy exactly as I had received it:
KNIGHT INDUSTRIES TWO THOUSAND
------------------------------
VEHICLE TYPE: Front engine, rear wheel drive, two
passenger, two door coupe
DIMENSIONS: Wheel base(101 in.) Length(189.8 in.)
Width(72 in.) Height(37.2 in.)
ENGINE TYPE: Knight Industries turbojet with modified
afterburners
TRANSMISSION: 8 speed microprocessor turbodrive with auto
pilot(needs no driver)
STEERING: TYPE> Modified rack-and-pinion
TURN-CIRCLE> 2ft. with rocket assist
BRAKES: Type- Electromagnetic hyper-vacuum disc
CHASSIS/BODY-- TYPE>Unit construction
BODY MATERIAL>Classified(compound is
virtually indestructible)
PRICE NEW: $11,400,000 est.
ACCELERATION: 0-60mph>.2 seconds with power boosters
Standing 1/4 mile>4.286sec.@300mph
BRAKING: 14ft.(70-0 mph)
FUEL ECONOMY: Classified(to avoid heart attacks in Detroit)
ACCESSORY FEATURES: Operationally controlled by the Knight
Industries 2000 microprocessor. Features include: Auto
Cruise, Auto Pursuit, Auto Collision Avoidance(with
over-ride option), and Emergency Eject. Knight 2000
microprocessor is equipped with a computer "voice," known as
"KITT." Complete audio/video in-dash entertainment/
surveillance capabilities,including radar,sonar,and x-ray.
#10
Almost right except it had a back seat, wasnt a 2 seater.
Engine was a 350, over .30, 11:1 compression, 64cc heads 2.02/1.60 valves, .580/.600 lift Crane cam, Edelbrock performer manifold ( all I could get to fit under the hood ) with a 750 Holley double pumper, HEI ignition with MSD 6, Edelbrock headers with 3" Gale Banks exaust.
Car still had 2.73s or something like that in the rear, the top end was incredible, I was messing with a vette on the highway a few weeks after the car was done, my throttle stuck open, thanks to that small ******* air cleaner, when I was in front of him, I had no choice but to shut the car down. I pulled over, and so did he, he told me he was doing 145 and he was maxed out. I had no idea being as my car speedo only went to 85, and that was with a Turbo 350 tranny which was only a 3 speed.
Engine was a 350, over .30, 11:1 compression, 64cc heads 2.02/1.60 valves, .580/.600 lift Crane cam, Edelbrock performer manifold ( all I could get to fit under the hood ) with a 750 Holley double pumper, HEI ignition with MSD 6, Edelbrock headers with 3" Gale Banks exaust.
Car still had 2.73s or something like that in the rear, the top end was incredible, I was messing with a vette on the highway a few weeks after the car was done, my throttle stuck open, thanks to that small ******* air cleaner, when I was in front of him, I had no choice but to shut the car down. I pulled over, and so did he, he told me he was doing 145 and he was maxed out. I had no idea being as my car speedo only went to 85, and that was with a Turbo 350 tranny which was only a 3 speed.