no, that is 120 for retail, with heat sinks, and either a one, or two year warranty, as I have said, Pricewatch ownz you

Heres some output from dmesg: (GNU/Linux 2.2)



Intel MultiProcessor Specification v1.4

Virtual Wire compatibility mode.

OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000

Processor #0 Unknown CPU [15:2] APIC version 17

Processor #1 Unknown CPU [15:2] APIC version 17

I/O APIC #2 Version 17 at 0xFEC00000.

Processors: 2

mapped APIC to ffffe000 (fee00000)

mapped IOAPIC to ffffd000 (fec00000)

Detected 2180796 kHz processor.

Console: colour VGA+ 80x25

Calibrating delay loop... 4351.59 BogoMIPS

Memory: 1036008k/1048512k available (1264k kernel code, 424k reserved, 10748k da

ta, 68k init)

Dentry hash table entries: 131072 (order 8, 1024k)

Buffer cache hash table entries: 524288 (order 9, 2048k)

Page cache hash table entries: 262144 (order 8, 1024k)

8K L1 data cache

12K L1 instruction cache

16384K L1 instruction cache

CPU: L1 I Cache: 16396K L1 D Cache: 8K

CPU: Intel® XEON(tm) CPU 2.20GHz

Checking 386/387 coupling... OK, FPU using exception 16 error reporting.

Checking 'hlt' instruction... OK.

8K L1 data cache

12K L1 instruction cache

16384K L1 instruction cache

CPU: L1 I Cache: 16396K L1 D Cache: 8K

CPU: Intel® XEON(tm) CPU 2.20GHz

per-CPU timeslice cutoff: 0.00 usecs.

CPU0: Intel Intel® XEON(tm) CPU 2.20GHz stepping 04

calibrating APIC timer ...

..... CPU clock speed is 2180.7912 MHz.

..... system bus clock speed is 99.1268 MHz.

Booting processor 1 eip 2000

Calibrating delay loop... 4351.59 BogoMIPS

8K L1 data cache

12K L1 instruction cache

16384K L1 instruction cache

CPU: L1 I Cache: 16396K L1 D Cache: 8K

CPU: Intel® XEON(tm) CPU 2.20GHz

OK.

CPU1: Intel Intel® XEON(tm) CPU 2.20GHz stepping 04

Total of 2 processors activated (8703.18 BogoMIPS).

hdc: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63

(scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/0

(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs

(scsi0) Downloading sequencer code... 396 instructions downloaded

(scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 3/4/1

(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs

(scsi1) Downloading sequencer code... 396 instructions downloaded

scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4

<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>

scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4

<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>

scsi : 2 hosts.

Vendor: IBM Model: DDYS-T36950N Rev: S96H

Type: Direct-Access ANSI SCSI revision: 03

Detected scsi disk sda at scsi0, channel 0, id 12, lun 0

scsi : detected 1 SCSI disk total.

(scsi0:0:12:0) Synchronous at 160.0 Mbyte/sec, offset 63.

SCSI device sda: hdwr sector= 512 bytes. Sectors= 71687340 [35003 MB] [35.0 GB]







But right now I'm always using my dell latitude at the apartment, real machines are still in parents basement on the sdsl. There's a 533Mhz alpha too but I just offered it to the Hermes developer who finishes the 2.0 release https://www.nopistons.com/forums/pub...DIR#>/wink.png



people ricing out computers... sigh.



:rice:

I'm bored?