At first glance these look like seperate wires, but on closer inspection it appears that they are the same wire as they both are black with a red hash marks every inch or so. Their path is traced in blue. The white connector seems to match the low coolant buzzer connector, but I have no clue where the black connector goes. I saw a picture in another thread that pointed out that the black connector goes to the power steering or ac. But since both of these wires look to be the same wire im thinking that it connects to the low coolant buzzer and the black connector connects to the body loom, but didnt see any obvious match.



Also, are the oil and water sensor wires also body wires and not part of the wire loom?





click for bigger. picture is a bit crappy.

 

They plug into eachother and keep track of the water level.

 

[quote name='c00lduke' date='Sep 5 2005, 08:01 AM']They plug into eachother and keep track of the water level.


[/quote]





Unless im understanding your wrong, because I dont think they plug into eachother. Would you say that one plugs into the sensor and the other end plugs into the body loom for the water buzzer and light?

 

black plug looks like acv solenoid plug, it would mate with another black plug

as would the other, white to white



two spade connectors, horizontal on top, vertical below?



by oil sensor are you referring to the one in the pan?

if so it plugs into the power harness from battery to starter and such, down the driver's side of the bay.

 

[quote name='89 Rag' date='Sep 5 2005, 12:57 PM']

by oil sensor are you referring to the one in the pan?

if so it plugs into the power harness from battery to starter and such, down the driver's side of the bay.


[/quote]



im talking about the oil pressure sensor wire and coolant temp wires. But it is good to know that the oil level is in the power harness =)

 

oops looks like that pic is broken, this will link to a bigger one