3rd Generation Specific Talk about 3rd gen RX-7's here.

Something Majorly Wrong!

Thread Tools
 
Search this Thread
 
Old 11-18-2003 | 08:48 PM
  #11  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

Originally Posted by Danno' date='Nov 18 2003, 05:37 PM
I drove the car fine this morning and then it gradually go worse throughout the day. I didn't drive all day but I went to lunch and then cam home after work. It got the worst just went I got close to home. Its only a 4 mile drive. How would I get oil in the intake????
Dont be fooled because you drove the car. I know guys who have driven around for a few days on a blown engine.



Sounds like it popped if you ask me.
Old 11-18-2003 | 08:48 PM
  #12  
9BASE3's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 6,331
From: Frederick MD
Default

Do you have a downpipe? Stock cat? One of them could be clogged. STOP DRIVING THE CAR in any case until you diagnose the problem...
Old 11-18-2003 | 08:49 PM
  #13  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

Originally Posted by 9BASE3' date='Nov 18 2003, 05:48 PM
Do you have a downpipe? Stock cat? One of them could be clogged. STOP DRIVING THE CAR in any case until you diagnose the problem...
Yup, stop driving and get a compression test.
Old 11-18-2003 | 09:59 PM
  #14  
ichibandan's Avatar
Junior Member
 
Joined: Nov 2003
Posts: 13
Default

Blow-by (credit to Fd3BOOST for thinking of it first) sounds like the most probably culprit. This is why the aftermarket created oil catch tanks, specifically to catch the oil that gets sputtered out when needing to bleed off pressurized air (crankcase on piston engines, don't know what the equivalent on rotaries are, will need help from you guys on all the new terminology!). If you are getting excessive oil in the blow-by, you may want to start looking and why that's happening. Typically it happens a lot more if you drive at WOT and let off throttle and do that over and over.
Old 11-18-2003 | 10:33 PM
  #15  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

Originally Posted by ichibandan' date='Nov 18 2003, 06:59 PM
Blow-by (credit to Fd3BOOST for thinking of it first) sounds like the most probably culprit. This is why the aftermarket created oil catch tanks, specifically to catch the oil that gets sputtered out when needing to bleed off pressurized air (crankcase on piston engines, don't know what the equivalent on rotaries are, will need help from you guys on all the new terminology!). If you are getting excessive oil in the blow-by, you may want to start looking and why that's happening. Typically it happens a lot more if you drive at WOT and let off throttle and do that over and over.
Alot of blow by on 3rd gens is generally a sign of your turbos getting old. I think that most stock twins with about 10k on them will start blowing off oil. The older the seals in them get the worse the blow by gets.

But that still doesnt explain the car not being able to idle.



I think he has two seperat issues.

I dont think that the oil in the intake is his problem.

Most likely that was already there and he just now took notice since he had to get in there and see why the car will not make any power and idle properly..





Again,.....COMPRESSION TEST THE ENGINE.
Old 11-18-2003 | 10:48 PM
  #16  
treceb's Avatar
to infinity & beyond, me
 
Joined: Aug 2001
Posts: 5,124
From: santurce
Default

https://www.nopistons.com/forums/ind...showtopic=2551
Old 11-18-2003 | 11:34 PM
  #17  
Danno's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2003
Posts: 949
From: Vernon, CT
Default

I will do the compression test and then figure out from there. I think your right, it may be two separate problems. i will check my TB to make sure eveything is connected correctly.
Old 11-22-2003 | 03:23 PM
  #18  
Danno's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2003
Posts: 949
From: Vernon, CT
Default

I did the compression test and it seems to be fine.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StockFC
2nd Generation Specific
6
01-25-2005 06:59 PM
rx788t4
2nd Generation Specific
4
01-19-2005 09:08 PM
Rotor-Rican
2nd Generation Specific
0
10-26-2003 11:58 AM
Cheers!
Rotary Engine Building, Porting & Swaps
13
08-21-2003 11:28 AM
Viper1308
Kills
16
10-03-2002 02:17 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:19 AM.