Oil Leak At Trans/motor Seal
#1
For no apparent reason I see an oil leak in the area where my transmission meets the motor. I am not sure if this is a job for a specialty shop, just the dealer, or maybe even a transmission shop. I do not have means to work under my car so if anyone has had this problem I would love a suggestion or two.
I have about 2000 miles on a new motor, could the install of this caused a problem?
No other pproblems since everything was replaced in early 2003 at PFS
I have about 2000 miles on a new motor, could the install of this caused a problem?
No other pproblems since everything was replaced in early 2003 at PFS
#2
If it's between the motor and tranny then it sounds like it's the rear main seal. To replace you have to drop the tranny. It is oil and not gear oil from the tranny correct? Either way you'd have to drop the tranny to fix the seal.
#3
Senior Member
Joined: Mar 2003
Posts: 2,436
From: Disclaimer: posts made after 11AM are most likely alcohol induced. Please disregard unless very funn
*IF* you can find somewhere that you can work under the car...it's an afternoon/weekend job. Good time to replace your engine and tranny oil while you're at it.
#5
Originally Posted by Dont_Be_A_Rikki' date='Feb 10 2005, 09:42 AM
This car is an auto! It was a mana motor when it was installed. Andy I sent you a pm. Maybe this weekend we can put it on my lift and take a look.
mazda doesnt always change the stat gear o rings, i dont think they take the gears off.
#7
Originally Posted by supertpr25' date='Feb 12 2005, 07:56 AM
The only good thing about this whole thing is that the seal you need is only 20 something bucks...A couple years ago I had RP replace mine and parts were something like 22.
Thread
Thread Starter
Forum
Replies
Last Post
John V
Rotary Engine Building, Porting & Swaps
3
04-03-2010 06:51 PM
-xlr8planet-
Rotary Engine Building, Porting & Swaps
5
12-28-2008 12:51 PM
White_FC
Rotary Engine Building, Porting & Swaps
4
03-11-2004 11:45 PM
FCmaniac
2nd Generation Specific
5
11-15-2002 12:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)