3rd Generation Specific Talk about 3rd gen RX-7's here.

Interior Lights And Dash Don't Work

Thread Tools
 
Search this Thread
 
Old 07-17-2003 | 12:22 PM
  #1  
Rotor26B's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 26
From: Queenstown, MD
Default

I just finished putting my manifold and everything else back on and now none of the interior lights, dash warning lights, or door ajar "ding"noise work. The power windows work put nothing else. My question is if I put the connectors on the wrong slot under the manifold will it cause this problem if not what will? Fuses seem fine. Thanks.
Old 07-17-2003 | 01:59 PM
  #2  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

Queenstown? Is that on the Eastern shore?

Anyway, you missed a fuse somewhere . The plugs only go in one way, you can get them wrong or they wouldnt go in. There are no two identical plugs.

Did you undo any grounds'?

I still say that its a fuse though. Check the ones under the hood as well as the ones under the dash.
Old 07-17-2003 | 02:41 PM
  #3  
Rotor26B's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 26
From: Queenstown, MD
Default

Thanks for the responce. Yes I'm over here on the eastern shore. White plains? Are you over here too. As far as I know I'm the only fd over here. Thank God it's not the connectors under the manifold. I didn't feel like taking that off again. The only reason why I thought it might be because my car won't start. It will turn over but it won't start.
Old 07-17-2003 | 02:58 PM
  #4  
apexkw's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 1,176
From: S.w. Florida boring ass ft myers to be exact. where the old people come to die
Default

check the main fuse under the hood... its a 120 amp fuse...if some lights work and your car wont start but cranks i bet you this is it.
Old 07-17-2003 | 05:01 PM
  #5  
Rotor26B's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 26
From: Queenstown, MD
Default

You guys know your stuff on this forum! It was the 120 amp main fuse. $5.60 fix. I think it's time for me to switch to this forum.
Old 07-17-2003 | 05:04 PM
  #6  
9BASE3's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 6,331
From: Frederick MD
Default

Originally Posted by Rotor26B' date='Jul 17 2003, 03:01 PM
You guys know your stuff on this forum! It was the 120 amp main fuse. $5.60 fix. I think it's time for me to switch to this forum.
Don't underestimate the power of the ....Light side? LOL



This is the best forum. ***** down.
Old 07-17-2003 | 05:05 PM
  #7  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

Originally Posted by apexkw' date='Jul 17 2003, 10:58 AM
check the main fuse under the hood... its a 120 amp fuse...if some lights work and your car wont start but cranks i bet you this is it.
Good call.

Yea were pretty damn good over here at nopistons.com



White Plains is in Charles County down on 301 south.
Old 07-17-2003 | 05:20 PM
  #8  
rfreeman27's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 4,107
From: fredneck MD
Default

yeah i thought i had to pull the manifold again because i thought i missed a plug...turns out it was the egr valve connecter...thanks to nopistons i didnt pull it again and waste time =) good for noobs like me!
Old 07-17-2003 | 08:36 PM
  #9  
apexkw's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 1,176
From: S.w. Florida boring ass ft myers to be exact. where the old people come to die
Default

lol i know from experience! i was like wtf is wrong here...then i was like WTF it cost how much for a fuse????????? ah yes good times.. nothing like good ole memories
Old 07-17-2003 | 08:47 PM
  #10  
toddp31's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 826
From: Misawa Japan
Default

mine didn't work one time either, I looked and looked at the fuses and nothing. My dumb *** didn't hook up the dimmer switch



All times are GMT -5. The time now is 09:26 PM.