3rd Generation Specific Talk about 3rd gen RX-7's here.

Expected Oil Pressure?

Thread Tools
 
Search this Thread
 
Old 08-13-2003 | 11:04 PM
  #1  
Stang94GT's Avatar
Thread Starter
Member
 
Joined: Jul 2003
Posts: 97
Default

Sorry guys, I did a search and had trouble finding the info I am looking for.



What is everyone seeing for oil pressure? Based only on the stock oil pressure gauge, I am seeing ~15psi @ idle, fully warmed engine. I am using 10w30 Mobil 1 synthetic. While driving I easily see 60+ psi and the oil pressure moves with rpm fairly consistently. Is this normal? It just sounds awfully low to me.
Old 08-13-2003 | 11:12 PM
  #2  
wraith's Avatar
Senior Member
 
Joined: May 2003
Posts: 401
From: DE
Default

it really depends on speed. you can see it go to all the way up when closer to red-line. you usually see around 50 to 60 just cruisin at speed.
Old 08-13-2003 | 11:19 PM
  #3  
toddp31's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 826
From: Misawa Japan
Default

I see around 4bar at idle about 60psi, I also have the upgrade thermo pelet. The stock gauge is way off, when my greedy shows 4bar the stock isn't even above 2bar.
Old 08-13-2003 | 11:23 PM
  #4  
Stang94GT's Avatar
Thread Starter
Member
 
Joined: Jul 2003
Posts: 97
Default

I did a little reading on the thermo pellet - is this considered a must for every car? I don't know that this car has had that service.
Old 08-14-2003 | 04:14 AM
  #5  
jspecracer7's Avatar
Senior Member
 
Joined: May 2002
Posts: 4,928
From: Okinawa, Japan
Default

where are you getting the reading from? The stock gauge?
Old 08-14-2003 | 07:36 AM
  #6  
Stang94GT's Avatar
Thread Starter
Member
 
Joined: Jul 2003
Posts: 97
Default

Yes, the stock gauge. My only aftermarket gauges are boost and water temp.



edit: It's not the pressure at speed or cruising that concerns me. It's the ~15psi that I'm seeing at idle that concerns me. OEMs typically don't give you functional gauges.. they're just dummy gauges set to somewhere in the normal range with very little sensitivity other than at the extremes. This oil pressure gauge seems pretty functional to me.
Old 08-14-2003 | 08:57 AM
  #7  
jspecracer7's Avatar
Senior Member
 
Joined: May 2002
Posts: 4,928
From: Okinawa, Japan
Default

well, when I had a stock motor, my oil pressure on the stock gauge was set at 0 psi...but on my Defi gauge, it read 30 psi~ both at idle.



Now my stock gauge reads 30 psi~ and my defi gauge reads 60~...at idle.
Old 08-14-2003 | 12:51 PM
  #8  
Sinful7's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 4,985
From: Denver, CO
Default

I typically see a very low reading (~5PSI) on the stock gauge whenever there's a high ambient tempature. Normally, however, I would guess that the 15PSI is where mine sits. The only times I see higher PSI at idle is on fresh oil or immediatly following startup. Also, I've noticed that at the end of the oil's life, the gauge will read very low, I seem to recall ~5PSI position..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rixon
Gaming, PC Chat & Consoles
3
04-20-2011 01:20 AM
rx7fcfc
2nd Generation Specific
1
06-01-2010 12:02 AM
rx7fcfc
2nd Generation Specific
3
05-28-2010 10:53 AM
1988RedT2
Insert BS here
16
01-14-2009 12:04 AM
phinsup
Insert BS here
7
07-10-2002 06:06 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:25 AM.