Defi Boost Gauge Installed Temp
#1
I have the gauge temp in and done some driving.
Stock sequential turbos:
With k&n air filter in stock box plus modified, DP and a ported wastegate here is the boost behavior.
1st gear WOT = 11PSI
2nd gear from a 2.5 RPM roll WOT = 11PSI
3rd from 35mph then WOT = 11PSI
Its a little hard to see the transition because of having to watch the road, but these are all the way to redline.
Now crusing on the interstate at 60, 70, and 80 MPH in 3rd and 4th gear and firmly giving it gas it goes to 12.5.
This is the only time it will go to 12.5
Any opinions?
Thanks....Scott
and then l
Stock sequential turbos:
With k&n air filter in stock box plus modified, DP and a ported wastegate here is the boost behavior.
1st gear WOT = 11PSI
2nd gear from a 2.5 RPM roll WOT = 11PSI
3rd from 35mph then WOT = 11PSI
Its a little hard to see the transition because of having to watch the road, but these are all the way to redline.
Now crusing on the interstate at 60, 70, and 80 MPH in 3rd and 4th gear and firmly giving it gas it goes to 12.5.
This is the only time it will go to 12.5
Any opinions?
Thanks....Scott
and then l
#2
Sounds really healthy. my DEFI read 13 PSI on occasion.. now, with a DP and CB, I saw 15PSI once.. lucky me, I didn't blow the motor.. never again will I floor it in fifth gear.
Why do you think something is wrong?
Why do you think something is wrong?
#4
...or install home depot boost and prespool controllers. Very cheap and easy...
http://www.rx7turboturbo.com/robrobinette/..._controller.htm
http://www.rx7turboturbo.com/robrobinette/..._controller.htm
Thread
Thread Starter
Forum
Replies
Last Post
AMRAAM4
RX-7 & RX-8 Parts For Sale & Wanted
0
01-01-2004 04:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)