Car Won't Start..
02-14-2004 | 09:20 PM
#1
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 993
From: Panama City Beach, Florida
Well here is the story:
Drove the car yesterday and stuff to work.. car has been running for about a week now. Car doesn't like cold starts one bit.. but once it gets to op temp its fine. Just idles low in the cold i guess.
Can smell fuel out the tail pipe.. i know its getting fuel. I took the plugs out.. they were wet/black.. i think they are fouled.. but its late and can't buy new plugs.
Pretty sure my plugs are shot.. they are only a week old. But its running a pretty rich map.. what do you guys think? It trys to start.. sputters, and dies.. and compression is perfect.
Drove the car yesterday and stuff to work.. car has been running for about a week now. Car doesn't like cold starts one bit.. but once it gets to op temp its fine. Just idles low in the cold i guess.
Can smell fuel out the tail pipe.. i know its getting fuel. I took the plugs out.. they were wet/black.. i think they are fouled.. but its late and can't buy new plugs.
Pretty sure my plugs are shot.. they are only a week old. But its running a pretty rich map.. what do you guys think? It trys to start.. sputters, and dies.. and compression is perfect.
02-15-2004 | 02:18 AM
#3
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 993
From: Panama City Beach, Florida
yeah, radio and all works.. pretty sure my plugs are shot.. yet again.
which isn't surprising.. the AF on this map is supposed to be 12:1 and its cold/rainy here.. along with the fact that the car hasn't been run-run in like 3 months.. so i'm prolly burning a LOT of carbon out of the engine.
which isn't surprising.. the AF on this map is supposed to be 12:1 and its cold/rainy here.. along with the fact that the car hasn't been run-run in like 3 months.. so i'm prolly burning a LOT of carbon out of the engine.
02-15-2004 | 02:44 AM
#5
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 993
From: Panama City Beach, Florida
got another PowerFC. Can't stray from what you know... the new AW car has the following mods now.. had it down for 3 months modding it and saving money heh.
PowerFC
Intake
Full Non-Seq / barebones no emissions equip
Profec B
3" DP
3" Resonated MP
3" JIC catback
JIC strutbar
BUR9EQs in all 4 holes
Fluidyne Radiator
Port Matched and Powdercoated UIM & LIM
new alternator
underdrive pulleys
99 Lip
PowerFC
Intake
Full Non-Seq / barebones no emissions equip
Profec B
3" DP
3" Resonated MP
3" JIC catback
JIC strutbar
BUR9EQs in all 4 holes
Fluidyne Radiator
Port Matched and Powdercoated UIM & LIM
new alternator
underdrive pulleys
99 Lip
02-15-2004 | 04:11 PM
#7
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 993
From: Panama City Beach, Florida
well yes and no.. i don't put around 
But i found yet another fuel leak.. primary injector o-rings are bad... on the #2 rotor. So i'm gonna have to yank the primaries yet again. I've never noticed it before since this is the first time i've checked under pressure. but sure enough its leaking like a ****.
As for starting.. put 2 new trailiing plugs in.. fired right up. Now i just have to order some orings and slap those bad boys on and hopefully all my problems will cease.
I'll keep you guys updated.
As for starting.. put 2 new trailiing plugs in.. fired right up. Now i just have to order some orings and slap those bad boys on and hopefully all my problems will cease.
I'll keep you guys updated.