3rd Generation Specific Talk about 3rd gen RX-7's here.

97 fd shutting down under full load

Thread Tools
 
Search this Thread
 
Old 02-01-2009 | 01:00 AM
  #1  
RACING_INNOVATIONS's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 2
Default

got a 97 series 7 rs fd runnig single garret gt3540 turbo apexi power fc etc etc done aprox 2k since rebuild was running sweet till driving the other day whole car cut out. restarted and took off when the problem started now every time it **** up under full load it dies gives the sensation like its running out of fuel back of its fine drive on half throttle every thing is fine but as soon as you boot it it dies as boost reaches round half a bar. checked it for fuel pressure geting about 50-60 psi checked spark plugs and they where all good was told to try swapping coils and did that and still same problem was told to test the resistance of the boost control solinoids under plenum chamber and put power to them to test there operation and they all seamed to be working so yeh scratching my head any ideas would be appreciated thanks
Old 02-01-2009 | 09:47 AM
  #2  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

Is the car over-boosting into a cell load range that hasn't been tuned? You are maxing out your fuel injectors are you? I would check the tune...
Old 02-02-2009 | 09:57 AM
  #3  
JBs93FD's Avatar
Senior Member
 
Joined: Mar 2005
Posts: 168
From: Reno , NV
Default

i would check for a dead spot in the map sensor, use a hand held vac/pressure tester {I use a mighty vac } and apply pressure to the nipple on the map while checking the hertzs on the signal wire i dont know the range it is supposed to have so you will have to check in the fsm. and like rev said go over your maps very good and maybee even log the dead spot.
Old 03-14-2009 | 01:30 AM
  #4  
RACING_INNOVATIONS's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 2
Default

finally got sum space to put in workshop and do some investigating found 1 dead seconday injectors given the turbo setup im running any one have a suggestion as to what size/type of injectors to run ?
Old 03-15-2009 | 04:05 PM
  #5  
JBs93FD's Avatar
Senior Member
 
Joined: Mar 2005
Posts: 168
From: Reno , NV
Default

Originally Posted by RACING_INNOVATIONS' post='918323' date='Mar 13 2009, 10:30 PM
finally got sum space to put in workshop and do some investigating found 1 dead seconday injectors given the turbo setup im running any one have a suggestion as to what size/type of injectors to run ?
what injectors are you running right now?
Old 03-20-2009 | 02:13 AM
  #6  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

stock primaries with 1680cc secondaries.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DavidPorter
3rd Generation Specific
2
04-25-2011 11:47 PM
rotarycrew
2nd Generation Specific
3
09-07-2008 10:57 AM
jrsprjctrx7
2nd Generation Specific
2
06-29-2005 06:06 AM
zmarko
3rd Generation Specific
13
04-26-2005 11:08 PM
Benny
3rd Generation Specific
16
06-30-2003 04:26 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:19 AM.