2nd Generation Specific 1986-1992 Discussion

Ver Low Idle, Fc Tries To Die Out

Thread Tools
 
Search this Thread
 
Old 04-15-2004 | 01:10 AM
  #1  
ROTARYROCKET7's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 1,687
From: QUEENS NYC
Default

Well i got my exhaust fixed and been driving the car. It passed inspection. The only thing that was rather high was they HC but thas cause the car was sitting in my yard for months. SInce i got her fixed ive noticed that when i start the car (sometimes) it idles so low that it shuts off. So i thought maybe it was the neutral swtich i dunno. So it hapend a second time and a third time today when i was leaving school at 815pm? So what can it be. ???





Thanks Jason NYC
Old 04-15-2004 | 01:12 AM
  #2  
roadkill669's Avatar
Senior Member
 
Joined: Jun 2003
Posts: 572
From: Culpeper, VA
Default

Perhaps your cold start system is screwed up
Old 04-15-2004 | 10:58 AM
  #3  
Cosmo Donk's Avatar
Senior Member
 
Joined: Jun 2003
Posts: 162
From: Figure out what that says and I will tell you.
Default

Is the car warm when this happens? Does your car idle high when first started cold? You might want to try searching for "Idle" in the subject line because I am sure there are a ton of posts out there.
Old 04-15-2004 | 11:51 AM
  #4  
ROTARYROCKET7's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 1,687
From: QUEENS NYC
Default

Originally Posted by Cosmo Donk' date='Apr 15 2004, 06:58 AM
Is the car warm when this happens? Does your car idle high when first started cold? You might want to try searching for "Idle" in the subject line because I am sure there are a ton of posts out there.
yeah it idles fine for most of the time when i start it idles high tfor like 30secs then goes down to 1k then down to 750. Sometimes when i start it it just dies out like it starts goes up to a hight rpm but when its coming back down it keeps going down and shuts off
Old 04-16-2004 | 10:46 AM
  #5  
pmr2000's Avatar
Member
 
Joined: Sep 2002
Posts: 79
From: NYC
Default

Check the TPS then BAC. Adjust the TPS. If you notice the idle drop under load such as power brakes/steering/ turning on ac or lights then its most likely bad or dirty BAC. Search the forum for procedures for both.
Old 04-16-2004 | 10:24 PM
  #6  
ROTARYROCKET7's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 1,687
From: QUEENS NYC
Default

Originally Posted by pmr2000' date='Apr 16 2004, 06:46 AM
Check the TPS then BAC. Adjust the TPS. If you notice the idle drop under load such as power brakes/steering/ turning on ac or lights then its most likely bad or dirty BAC. Search the forum for procedures for both.
yeah thanks, today i noticed that when i press the brakes the rpm goes way down to like 300rpm then when i release it jumps back up like to 750-1000rpms.



Thanks ima check the BAC, what does the BAC control
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Evil_Sephiroth
3rd Generation Specific
5
04-15-2014 08:03 AM
Dev
2nd Generation Specific
5
05-29-2006 05:57 PM
88RX7annived
Kills
17
05-22-2003 04:07 PM
Jims5543
Kills
20
12-14-2002 05:37 AM
Rotarydragon
Insert BS here
9
11-16-2002 02:35 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:17 AM.