Disabling factory alarm and keyless entry
03-31-2002 | 04:43 AM
#1
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 2
Hi,
I am installing keyless entry in my 91 NA rx7. In order to disable the factory alarm, my Omega spec sheet on the rx7 for 89-93 says that a light green/black wire (-) in either kick panel disables the factory alarm. Anyone have any idea where the wire exactly is and whether it is a light green striped and black wire or light green wire with a black stripe...thanks!
I am installing keyless entry in my 91 NA rx7. In order to disable the factory alarm, my Omega spec sheet on the rx7 for 89-93 says that a light green/black wire (-) in either kick panel disables the factory alarm. Anyone have any idea where the wire exactly is and whether it is a light green striped and black wire or light green wire with a black stripe...thanks!
03-31-2002 | 01:46 PM
#2
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 2
Ok, its all done 
The center wiring harness on the CPU has a light green wire with a black stripe which controls the door key sylinder switch which in turns disables the factory alarm for the 89-91 rx7s. Just jump the keyless entry "factory disarm" wire to that little guy and its all done. Special thanks to the fc3s website which had the factory service manual for the 89-91 rx7s
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)