2nd Generation Specific 1986-1992 Discussion

Cat Converter Glowing Red

Thread Tools
 
Search this Thread
 
Old 05-24-2003 | 08:44 PM
  #1  
guyverx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 24
Default

i am in no way a engine head so i dont know whats going on. i was driving down the road and all the sudden there was a popping noise below me. my engine rpm's were so low and sparatic it wasnt helpinn matters. half the lights in the car went dead and i instantly notice i had no power what so ever. i pulled over and with the car still running, (some how, idleing like hell and the engine bounceing around like mad) the overall engine looked ok, belts ok. i then decied to check under the car, this is when i notice the cat converter was glowing red hot. actually more like bright orange. now im guessing my cat converter simply blew out but id like someones opinion that knows about engines. its a bonze super flow cat converter and its still under a year old so hopefully they can help out to. any thoughts would be apreciated. thanks
Old 05-24-2003 | 11:55 PM
  #2  
vosko's Avatar
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

cat is clogged............... yeah get a new one under warranty!
Old 05-25-2003 | 12:28 AM
  #3  
75 Repu's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 4,848
From: Mike is a Liar!
Default

The rotary engine Strikes again..
Old 05-25-2003 | 02:04 AM
  #4  
kahren's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 1,345
From: CT
Default

its a rotary, take that damn thing out
Old 05-25-2003 | 02:32 PM
  #5  
ChainSawOnSteroids's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 1,007
Default

cat converter? what is that?
Old 05-28-2003 | 10:21 PM
  #6  
guyverx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 24
Default

well i contacted the rx7.com guys and they said it sounds like my engine just went out. its got 120,000 on it now and i was starting on doing reasearch for a new one anyway. im still going to look at my catalytic converter though first. any thoughts on an engine though. i was thinking 13b-rew. i like that sas raceing 3 rotor bad boy that pumps out 700hp.
Old 05-29-2003 | 12:12 PM
  #7  
Drifter93's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 184
From: Dyess AFB/ Abilene, TX
Default

Step one- remove old cat. Step two- replace old cat with midpipe. Step three- go have fun and shoot some really nice flames. And before I forget watch your boost...
Old 05-29-2003 | 12:15 PM
  #8  
Drifter93's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 184
From: Dyess AFB/ Abilene, TX
Default

And as for the engine. Go with the 13B but have a good street port put on it and any other things that you can afford while the engine is already out of the car. Less money to do it now then to do it later.
Old 05-29-2003 | 02:13 PM
  #9  
ROTARYROCKET7's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 1,687
From: QUEENS NYC
Default

yo take out the cat and put a RB complete exhaust with headers silencer and cat back man
Old 05-29-2003 | 08:24 PM
  #10  
guyverx's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2002
Posts: 24
Default

well i just removed the cat converter and started the car up, its loud with out an exhaust system on it but the engine is running smooth now. im sure im shooting flames out my header big time. unfortunatly i shined a light through the cat and its going right through. im not seeing a blockage. so im trying to take off my y pipe now, mabey thats the problem. not to sure how though. i figure since i have dual exhaust it cant be a mufler in paticular because it would just run out the other pipe. but if my y pipe is clear of sny stopage and my muflers are its definatly got to be the cat even though it looks clear. like i said im not much of an engine guy. r/c car engine mabey but not real car.



All times are GMT -5. The time now is 05:24 AM.