2nd Generation Specific 1986-1992 Discussion

Buying A Car But Need It Running First

Thread Tools
 
Search this Thread
 
Old 06-10-2004 | 07:54 PM
  #1  
FrostRacing's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 233
From: Columbus, Ga
Default

ok so the car has no spark or fuel (im getting it through the rail but not into the engine) so im thinking ecu (new) or cas (new) but its not. i checked the 15a fuse and the egr both are good. all grounds are good along with the main relay. i think it might be a short some where but i dont know where to look. what wires should i trace down? the guy im buying it from removed the alarm and installed a e-fan is there anying under the dash that would cause this? is the cas suppose to have voltage to any of its wires i dont see how it would work with out some sort of power going in i checked it and it had none going in or out (i know the cas is good).

so



1.no fuel from injectors

2.no sprark (i have a power source going to the coil and the main relay)

3.no tach

4.all warning lights are on when the key turned to on this may be normal

5.no power from or out of cas
Old 06-10-2004 | 07:56 PM
  #2  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

when he took the alarm out did he put the wire under the dash back together?
Old 06-11-2004 | 08:15 AM
  #3  
FrostRacing's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 233
From: Columbus, Ga
Default

i dont think so there are a lot of wires clipped
Old 06-11-2004 | 03:49 PM
  #4  
CrassFC3S's Avatar
Senior Member
 
Joined: Nov 2003
Posts: 516
From: San Antonio Tx
Default

all the dummy lights are suposed to come on when its in acc. fix all the wiring under the dash even if that isnt the problem. and you said its coming out of the injectors or no?
Old 06-13-2004 | 08:52 AM
  #5  
FrostRacing's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 233
From: Columbus, Ga
Default

no none out of the injectors. from what i see the fuel pump relay was rigged and the fuel pump tester on the afm (the yellow connector by the afm) was bolted down to a ground i dont know if this is some sort of mod or not but the harness from the afm back is melted. im going today to replace the harness fix the wiring under the dash and replace the relay and hope the damn thing starts. one more question how did it burn up all the wires and not blow a fuse?
Old 06-13-2004 | 07:33 PM
  #6  
FrostRacing's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 233
From: Columbus, Ga
Default

i got the car just had to replace the whole harness and ecu with that relay
Old 06-14-2004 | 01:35 PM
  #7  
CrassFC3S's Avatar
Senior Member
 
Joined: Nov 2003
Posts: 516
From: San Antonio Tx
Default

good deal is it running?
Old 06-17-2004 | 08:12 AM
  #8  
FrostRacing's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 233
From: Columbus, Ga
Default

yea its running great unlike my other 7 well thanks j9fd3s and crass
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SAfreak
Meet and Greet
4
08-02-2014 09:48 PM
phinsup
Insert BS here
19
01-13-2010 11:12 PM
Twerp129
1st Generation Specific
14
02-16-2006 01:27 AM
87rotary
2nd Generation Specific
4
02-17-2005 11:10 PM
rx-7addict
3rd Generation Specific
4
03-19-2003 08:31 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:16 AM.