2nd Generation Specific 1986-1992 Discussion

87t2 V 88t2 Engine

Thread Tools
 
Search this Thread
 
Old 02-05-2003 | 11:22 AM
  #1  
joe2dmax's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 150
From: gville and the burg
Default

would like to know if there is any small differences at all between these two engines.

thanks !
Old 02-05-2003 | 11:27 AM
  #2  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

None that I know of.
Old 02-05-2003 | 11:33 AM
  #3  
joe2dmax's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 150
From: gville and the burg
Default

'cause a friend told me he got a 87tII engine for me for 500 (its going to my 10ae, dont know if the intercooler and the turbo is in there.

so its all good to have87tII engine and a 88t2 tranny. It wil bolt right up?
Old 02-05-2003 | 11:36 AM
  #4  
CrazyAssRX7's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 328
Default

from what i know they are almost exact

and yeah the 87 tII engine will fit with the 88 tII tranny
Old 02-05-2003 | 11:38 AM
  #5  
joe2dmax's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 150
From: gville and the burg
Default

thanks for the replies. as soon as i get my 10ae set up,ill post pics.



thanks again
Old 02-05-2003 | 11:56 AM
  #6  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

the only difference is that the early 87's have low impedance injectors, a resistor, and the wiring for the resistor



mike
Old 02-05-2003 | 12:54 PM
  #7  
joe2dmax's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 150
From: gville and the burg
Default

thanks j9,
Old 02-05-2003 | 12:55 PM
  #8  
joe2dmax's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 150
From: gville and the burg
Default

anything else, btw?
Old 02-05-2003 | 01:57 PM
  #9  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

nope, other than that they are indentical. btw the ecu will run either setup, and they dont let you mix injectors/harnesses/resistors so you cant get it wrong and fry something



mike
Old 02-06-2003 | 09:17 AM
  #10  
joe2dmax's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 150
From: gville and the burg
Default

j9, can you please explain about low impedance? is having a low impedance injectors a disadvantage? and if it is, is there anyway i can replace my injectors with the 90-91 t2 injectors, resistors and wiring?

thanks again



All times are GMT -5. The time now is 03:15 AM.