20b In A Glc
08-21-2003, 09:42 PM
#278
Senior Member
Thread Starter
Join Date: Nov 2001
Posts: 2,284
I'm trying to piece together a bolt set for the engine to bellhousing out of my spare bolts pile.
So far, I found an FD bolt that's perfect for the one I'm missing. It's the one that fits below the starter and has to have 70mm of free length. I also found that an '82 or older alternator bolt is good to use with the starter. You know, the old FB style? It's doesn't have to be as long as an FC or FB bolt because the 20B doesn't have a hole there; well, it's got a gaping hole, but anyway. The rest are all found except for maybe the lower right corner. I've got a damaged one with trashed threads that somebody tried to use in the starter hole. I swear I didn't do it, 'cause I'm a professional! I would never confuse a 1.25 with a 1.5 thread pitch... So I've got to match it up with whatever else I have. Here's to not having to go buy a bolt from wherever. :cheers:
Man, what a boring post compared to you guys! An E11 and a beefy custom FD subframe? Man, I can't compete with that!
So far, I found an FD bolt that's perfect for the one I'm missing. It's the one that fits below the starter and has to have 70mm of free length. I also found that an '82 or older alternator bolt is good to use with the starter. You know, the old FB style? It's doesn't have to be as long as an FC or FB bolt because the 20B doesn't have a hole there; well, it's got a gaping hole, but anyway. The rest are all found except for maybe the lower right corner. I've got a damaged one with trashed threads that somebody tried to use in the starter hole. I swear I didn't do it, 'cause I'm a professional! I would never confuse a 1.25 with a 1.5 thread pitch... So I've got to match it up with whatever else I have. Here's to not having to go buy a bolt from wherever. :cheers:
Man, what a boring post compared to you guys! An E11 and a beefy custom FD subframe? Man, I can't compete with that!
08-22-2003, 11:56 PM
#280
Senior Member
Thread Starter
Join Date: Nov 2001
Posts: 2,284
Details? Who, me? 
I cut out the oil pan 'baffle' plate today. The next step is to cut out the middle and clean it up a bit. Then it and the 13B pan can go on the engine.
I also found a bolt for the rear lifting hook. It's a perfect match lengthwise for one off of my 13B. It's one of those 8.8 aftermarket bolts you find here and there. It's got a 17mm head on it. I'm not sure which engine it'll go on yet. Just another boring detail.
I cut out the oil pan 'baffle' plate today. The next step is to cut out the middle and clean it up a bit. Then it and the 13B pan can go on the engine.
I also found a bolt for the rear lifting hook. It's a perfect match lengthwise for one off of my 13B. It's one of those 8.8 aftermarket bolts you find here and there. It's got a 17mm head on it. I'm not sure which engine it'll go on yet. Just another boring detail.