20B Forum This forum is for all things pertaining to a 20B installation, modification, ideas, anything you can think of as long it has to do with a 20B

20b auto bell housing

Thread Tools
 
Search this Thread
 
Old 10-29-2007 | 10:52 AM
  #1  
rxmiata2006's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2006
Posts: 28
From: Vancouver Island Canada
Default

i am curently in the prosess of putting a 20b in my miata and i plan to put a tremec t56 6 speed behind the engine and whan i got my half cut i keeped the bell housing off the auto and o an thinking of using it for the tremic. it looks very strong but was wondering if anyone had used one or broken one or if it should be good hoping for 550 hp out of the 20b
Old 10-29-2007 | 03:50 PM
  #2  
patman's Avatar
Junior Member
 
Joined: Jan 2004
Posts: 26
From: Muskegon, MI
Default

I doubt you will get a good answer on this since no one uses the auto tranny, but i would assume it will be fine. I am making more than that on the TII 5 speed bellhousing.
Old 10-29-2007 | 05:56 PM
  #3  
Clarks7's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 217
From: Davis
Default

the bell housing wont be your weak point in the setup!



Sounds cool, have you measured it all out?

With or without turbos?



If you really want a 6 spd, use the rx8 tranny. it already bolts to the rotory, you will need to fabricate the mounts...
Old 10-29-2007 | 07:19 PM
  #4  
patman's Avatar
Junior Member
 
Joined: Jan 2004
Posts: 26
From: Muskegon, MI
Default

Originally Posted by Clarks7' post='886633' date='Oct 29 2007, 02:56 PM
If you really want a 6 spd, use the rx8 tranny. it already bolts to the rotory, you will need to fabricate the mounts...


the rx8 tranny is weak as ****, I wouldnt use it. If youre not set on the 6th gear, a TII tranny would be fine for that power level, especially in a miata. Ive been running mine at 575 rwhp for months now, havent broken it yet.
Old 10-30-2007 | 03:58 PM
  #5  
Clarks7's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 217
From: Davis
Default

I agree the t2 tranny is the way to go. I have one on my 20b. But the weak point on a 20b miata won't be the tranny, it will be the tires! The car is going to be too light and with all the weight in the front, it will consistanly break where the rubber meets the road! Too much fun!
Old 10-31-2007 | 11:02 PM
  #6  
hsmidy's Avatar
Senior Member
 
Joined: Dec 2006
Posts: 131
Default

any perticular reason you guys didnt go with a s6 box?
Old 10-31-2007 | 11:25 PM
  #7  
patman's Avatar
Junior Member
 
Joined: Jan 2004
Posts: 26
From: Muskegon, MI
Default

because my car is a s4. also from what I have heard, s4 was the strongest drivetrain...
Old 11-01-2007 | 10:51 AM
  #8  
Clarks7's Avatar
Senior Member
 
Joined: Nov 2002
Posts: 217
From: Davis
Default

Originally Posted by hsmidy' post='886845' date='Oct 31 2007, 09:02 PM
any perticular reason you guys didnt go with a s6 box?




Ease of install (most people are dropping these into FC's and the tranny bolts and mounts right up, I am sure the people running the FD's keep the S6 tranny's). And, have you ever driven the FD? The S6 tranny shifts like poo poo. slow and clunky!



It is one of the worst things I hate about my FD (In fact my favorite tranny is in my GSLSE).
Old 11-01-2007 | 10:47 PM
  #9  
hsmidy's Avatar
Senior Member
 
Joined: Dec 2006
Posts: 131
Default

nar never driven an s6 my s4 was quiet sloppy but thats quiet common given the age, nar i was just wondering thats all as my 20b is going into a early celica so it was never intened to have this sort of power plant in it and i figured a newer box would have been the better choice plus theres no remote shiter in the fd
Old 07-06-2010 | 07:01 AM
  #10  
johnb36's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 1
From: Melbourne
Default

Hi. From what I am reading the Tremec will be the go. You will need a clutch, manual bell housing, adaptor, shifter extention, longer tail shaft.



I am tracking down the adptor at the moment.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GLC13B
RX-7 & RX-8 Parts For Sale & Wanted
0
11-15-2008 05:34 PM
90gtr-x
Performance Mods
0
04-19-2007 11:10 PM
Arnetts7
RX-7 & RX-8 Parts For Sale & Wanted
0
01-15-2004 01:41 PM
joe2dmax
2nd Generation Specific
8
02-28-2003 04:55 PM
rotazuk
Engine Swaps
5
06-25-2002 09:03 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 20b auto bell housing



All times are GMT -5. The time now is 04:17 PM.